Tufting Klippan Hack – Be Emerald Green with Envy!

With St Patrick’s day coming up and 2017’s Pantone colour of the year, we’ve decided to bring in a hack for all lovers of the colour – Green.

And what better way to do it then to showcase it alongside our Rouge Emerald velvet slipcover, upgraded with new legs and Chesterfield-inspired sofa tufting.

But first, here’s what inspired us to do so:

The Inspiration

Chesterfield Tufted Sofa c/o AnnaSuiShop
Chesterfield Tufted Sofa c/o AnnaSuiShop

A few of us here really like the Chesterfield sofa and were thinking, “Wouldn’t it be really cool if we could hack a sofa into a Chesterfield, like the Klippan?”

And that was the lightbulb – the Klippan is pretty much like the Chesterfield minus the round arms and tufting.

Brayden Studio Verdi Tufted Sofa c/o Wayfair
Brayden Studio Verdi Tufted Sofa c/o Wayfair

Then we thought maybe we should be a bit more realistic and consider other options since the Chesterfield’s trademark look is precisely because of the round arms (something that we can’t really create) and tufting (something we can definitely do).

We continued searching and eventually we found something we liked.

Simple Tufted Sofa c/o Dylan Gallery
Simple Tufted Sofa c/o Dylan Gallery

A square-arm sofa with a very modern and minimal look, something we thought we could recreate very easily.

Thus began our journey, here are the before photos:

IKEA Klippan before slipcovers
The IKEA Klippan – Without Slipcovers
IKEA Klippan with Rouge Emerald Covers
IKEA Klippan with Rouge Emerald Covers

The Prepwork

First and foremost, here are some tools that you’ll need:
– 1 Comfort Works Klippan Slipcover (Assuming you already have an IKEA Klippan)
– 1 Tufting Kit (Twine, Needle, Scissors, Buttons)
– 1 Pencil for marking
– 1 Ruler
– 1 Willing Friend/Partner who can help you

Next, you’ll need to decide on how much tufting you want to do. Initially we wanted to do the entire sofa, back and armrests – the whole shebangs.

That was when we thought the Klippan could become a Chesterfield, but we realised that it’s best to have it minimalist with its square arms, so we settled for 8 buttons the end.

As such, using my expert mathematical skills, we figured a 15.6cm gap between each button would work the best.

The Fail

Before we move on to the full instructions, here are some things you SHOULD NOT do because we did – and realised we made a mistake.

Flipping the Klippan couch
We flipped the couch – DON’T do this

Basically start measuring and calculating to see what would be the best way to get 8 buttons placed equidistant from each other.

The problem unfortunately, was that we marked and measured from the back instead of the front – where we’re supposed to be putting the buttons on.

Here are some photos documenting our silliness nonetheless:

The Hack

Lesson learned: Instead of marking where you want the buttons to be at the back, mark it at the front on the slipcover – a white chalk from the tufting kit would work.

And yes, we didn’t take pictures here because we wanted to jump straight into tufting.

Surprisingly the board used in the Klippan wasn’t as thick as we imagined, so the needle poked right through fairly easily with some elbow grease.

First sign of the needle going through
First sign of the needle going through

Once the needle’s through, tufting it with a button is the easy part.

If you have forgotten how this works – check it out in this tutorial:

The tricky part would be tying it to the back of the sofa, so it’s important to make sure you use about an arm’s length of twine to get it to the other side and onto the springs of the Klippan sofa.

The best part is that if you don’t like how deep the buttons are tufted into the cushion, you can adjust them by moving the string accordingly – you will need a friend on the other side to push the button in more for a more obvious tuft.

string to spring closeup

all the strings attached

And yes we’ve tested – the springs are thankfully safe, and will not break upon sitting.

You can also see how uneven my “arm’s length” was throughout the process but hey it worked out fine at the end!

Here’s how the front looks:
tufting close up

close up 2 tufting

tufting from the front

It gets easier once you get the first and second tufts done; You’d have completed it before you know it.

Okay, it did take us about 2-3 hours in total at the end as we did have to figure out measurements firstly, make a mistake and then get the job done.

The Reveal

And there you have it, an IKEA Klippan sofa hacked with a Rouge Emerald slipcover and tufting buttons.

Klippan Slipcover Tufting Hacktuftings close up

Looks pretty damn premium and “not IKEA” yea?

It’s no surprise that this would be one of IKEA’s most popular sofa – check out our IKEA Klippan review here.

Want a Klippan sofa now? Let us know what you think in the comments below!

Summary
Tufting IKEA Klippan Hack – Be Emerald Green with Envy!
Article Name
Tufting IKEA Klippan Hack – Be Emerald Green with Envy!
Description
We decided to hack the basic Ikea Klippan sofa into a glamorous Chesterfield(ish) sofa with a new velvet slipcover, tufting buttons and new legs. Check out the full tutorial here.
Author
Publisher Name
Comfort Works
Publisher Logo

Article written by

A Search Marketing specialist for both physical and digital products, Chuck's also a passionate analyst who loves crunching numbers and big data. Out of the office, he's a tutor, guitarist, and a fitness enthusiast; A true Chuck of all trades.

6 Responses

Page 1 of 1
  1. Orlagh
    Orlagh at | | Reply

    I did exactly the same with my green velvet klippan, except I’ve seven buttons (the middle tuft went through the cushion dead centre but was driven through the plywood at an angle to avoid the piece of wood in the middle at the back of the sofa. I used some old buttons in the same way you double tuft rather than tying off on the springs. It made it a 45 min one person job. 30 mins of which were reminiscing distances. (Approx 18 cm between buttons). The brilliant thing with tufting the klippan, the cover doesn’t slip as much anymore!

  2. Kristy Jetson
    Kristy Jetson at | | Reply

    I love this ! I’m thinking about doing this to my couch – but I’m not very creative.

  3. PJAI
    PJAI at | | Reply

    Hi there,
    this looks amazing! What height are the legs? And are they the Bailey ones?

Please comment with your real name using good manners.

Leave a Reply to PJAI Click here to cancel reply.